Easy Leveler Block Modification

If you have a problem getting down under your rig, this may help when placing your leveler blocks.

Get four 10 x 10 inch or larger blocks of 2 inch treated lumber, four plastic leveler blocks, eight 2 inch wood screws, screw driver, drill bits and drill.  You will also need an awning hook.  You know the thing that you use to pull the manual awnings down with.

Place one of the plastic levelers in the center of a piece of wood and screw it down with two screws.  Do this for all four pieces.

Step 1 - Screw plastic levelers to block of wood
Step 1 – Screw plastic levelers to block of wood

Next drill a 1/2 inch hole in opposite corners of the wood.

Step 2 - Drill 1/2 inch holes in opposite corners of the board.
Step 2 – Drill 1/2 inch holes in opposite corners of the board.

That’s it.  Your done.  Now you can use the awning hook to push and pull the wood with leveler blocks under the rig’s levelers.

Completed Project
Completed Project

 

Leave a Reply